Verified forklift part reference
Heli 2-3.5 ton forklift steering link A21B4-32081 connects steering components on compatible Heli 2.0–3.5t forklift configurations.
This page identifies one specific reference. Similar-looking parts may use different dimensions, connectors or applications, so we verify the part number together with the forklift or engine information before supply.
Verify This Part for My Forklift
Forklift steering parts: confirm wear before replacement
1. Confirm the reported fault
Measure free play, inspect both sides under load and record noise, binding, tyre wear and steering response.
2. Identify the exact reference
Check the truck brand, model, serial number, complete part number, nameplate and clear photos of the old part and its connections. Similar-looking components are not assumed interchangeable.
3. Inspect the related system
Inspect lubrication points, pins, bushes, rod ends, mounting bolts and axle articulation during routine service. Confirm left/right orientation and all critical dimensions.
4. Select the supply option
Safety-critical steering joints should be genuine or from a proven manufacturer with material and dimensional control. Low-cost unverified joints are not recommended.
Review forklift steering parts
Request part verificationImportant steering-link reminder
Steering play must be traced to the correct joint
A steering link must match its length, joint taper or pin diameter, thread, offset and mounting orientation. Excessive steering play may also come from king pins, axle bushes, wheel bearings or the steering cylinder.
Confirm the fault
Raise and support the truck safely, then isolate movement at each joint while checking axle bushes, king pins, bearings and hydraulic steering components.
Identify the link
Send centre-to-centre length, both end details, thread and taper dimensions, bend or offset, truck model and installed photos.
Install and inspect
Use the correct fasteners and locking method, lubricate where specified and verify free movement and steering alignment after installation.
Product overview
| Product | Steering Link |
|---|---|
| Part number | A21B4-32081 |
| Brand reference | Heli |
| System | Steering axle |
| Supply option | Clearly stated in the quotation after verification |
| Application | Confirm by forklift model, engine model or serial number as applicable |
Why this steering link matters
Steering links must match the length, joint design, taper and mounting position. Small differences can affect steering geometry and installation.
Part reference
A21B4-32081 is verified before quotation.
Joint geometry
Overall length, joint ends and mounting positions are compared with the old link.
Truck confirmation
Heli model and serial number identify the correct steering axle version.
Accurate quotation
What to send
One complete request helps us identify the part faster and avoids repeated questions.
- Heli forklift model and serial number
- Old steering link photo
- Joint-end and mounting-point photos
- Required quantity
Continue your parts search
Use these visual links to move from this product to the most relevant forklift parts information.
Need A21B4-32081?
Send the part information and quantity. We will verify the reference before preparing the quotation.
Request a Verified QuoteWhy order forklift parts from Authpart?
Correct reference. Clear supply. Responsible follow-through.
Supported genuine forklift parts and suitable OEM options are identified clearly in the quotation.
Our forklift-parts team checks the reference together with the brand, model, serial number and visible product details when required.
Product labels, condition, quantity and packing information can be confirmed before international shipment.