Brake wheel cylinders currently listed
The references below are separate parts, even when the name and appearance are similar. Check the forklift brand, the number on the part or package, and the product photo before requesting a quotation.
If the part number is missing, send the forklift model, nameplate and clear photos of the old part. Our parts team will identify the checks still needed before quotation.
Forklift brake parts guide
Forklift Brake Wheel Cylinders: Left, Right and Brand References
A wheel cylinder converts hydraulic brake pressure into movement at the brake shoes inside the drum. Bore size, mounting, inlet position, piston design and left/right orientation must match the brake assembly. Similar castings do not prove interchangeability.
HELI Left Cylinder
22673-72041-LLeft-side brake wheel cylinder referenceCheck this cylinderHELI Right Cylinder
22673-72041-RRight-side brake wheel cylinder referenceCheck this cylinderHangcha Left Cylinder
24433-76000-L25HBN left-side referenceCheck this cylinderHangcha Right Cylinder
24433-76000-R25HBN right-side referenceCheck this cylinderWhere it is fitted
The wheel cylinder mounts on the brake backing plate inside the drum. Its pistons push the brake shoes outward when the operator applies hydraulic pressure.
Left and right matter
Bleeder position, inlet direction, mounting and piston arrangement can differ by side. The suffix and installation photo should be checked before supply.
What identifies it
Use the part number, truck model and serial number, axle or brake assembly reference, left/right position, bore or dimensions and clear photos of ports and mounting points.
Fault symptoms and the checks behind them
| Fluid inside the drum | Inspect wheel-cylinder boots, piston seals, brake pipe and fittings. Brake linings contaminated with fluid require assessment under the service procedure; cleaning alone may not restore safe friction. |
|---|---|
| Truck pulls while braking | Compare both sides for leakage, seized pistons, shoe adjustment, lining condition, drum condition and tyre grip. A pull is not proof that only one wheel cylinder is faulty. |
| Low or soft pedal | Check fluid level, leaks, air in the circuit, master cylinder, hoses, wheel cylinders and correct adjustment. Bleed the system using the truck manufacturer’s sequence. |
| Repeated seal failure | Check bore corrosion, piston damage, incorrect brake fluid, heat, contamination and brake-shoe overtravel. A damaged bore is not corrected by fitting another seal kit. |
Safety rule: brake components are not selected by shape alone. Confirm the hydraulic specification and side, and test brake operation according to the service manual before returning the truck to use.
Genuine or replacement wheel cylinder?
Genuine parts reduce uncertainty when the axle, production version or internal bore is unclear. An identifiable OEM-quality replacement can be considered when bore size, seal material, port thread, mounting and side are documented. Unverified low-cost cylinders create risk when casting dimensions look correct but hydraulic volume or seals differ.
Price differences reflect brand, bore and casting specification, whether a bleeder and fittings are included, supply level and order quantity. Left and right parts must be quoted as clearly identified references rather than assumed pairs.
Information required for a wheel-cylinder quotation
Send the forklift model and serial number, current part number, left or right position, axle or brake reference, photos of the installed cylinder, inlet and bleeder, bore or key dimensions and required quantity.
Verified forklift replacement part
HELI Left Brake Wheel Cylinder 22673-72041-L operates the left drum-brake shoes on a matching HELI 2.0–2.5-ton forklift.
Authpart checks the reference together with the forklift information before quotation. This gives you a clear, accountable route to the correct part instead of relying on appearance alone.
Verify This Part for My ForkliftProduct overview
| Product | HELI Left Brake Wheel Cylinder |
|---|---|
| Part number | 22673-72041-L |
| Brand reference | HELI |
| System | Drum brake system |
| Verification | Part reference, truck identity and physical details checked before quotation |
| Supply option | Genuine or suitable replacement status stated clearly in our offer |
Why the correct match matters
Left and right wheel cylinders are not automatically interchangeable. Port orientation, bleeder position, bore and mounting details must match the brake assembly.
Left-side reference
The L suffix is checked before quotation.
Brake layout
Port, bleeder and mounting orientation are compared.
Application check
Truck model and axle configuration are confirmed.
Accurate quotation
What to send
Send the information you already have. Our parts team will check it before preparing the quotation.
- HELI model and serial number
- Part number 22673-72041-L
- Left-side brake assembly photos
- Required quantity
Continue your parts search
Browse related forklift parts with verified references and real product photos.
Need 22673-72041-L?
Send the forklift details, available label photos and quantity. We will check the reference before preparing your quotation.
Request a Verified QuoteWhy order forklift parts from Authpart?
Correct reference. Clear supply. Responsible follow-through.
Supported genuine forklift parts and suitable OEM options are identified clearly in the quotation.
Our forklift-parts team checks the reference together with the brand, model, serial number and visible product details when required.
Product labels, condition, quantity and packing information can be confirmed before international shipment.